EDGE-3
Soundproof MDC O&M
Page 38
Device manager
Hardware version: Displays device
’
s hardware version
Software version: Displays the device
’
s software version
Default Units: Change between Metric to Imperial
Servo: If 1 or 2 servos are connected to the EMS this must be selected to
‘
ON
’
for the EMS to control the servos
Universal U1
-
U4 Input Type: Select the sensor type that is added to these ports on the EMS
IO 1
-
6 Sensor Type: Select which digital sensor is plugged into the EMS
Camera: Enable to active.
Camera 1: Select the camera from the drop
-
down menu, if unable to find any make sure that the USB cable from the camera is
plugged into any of the USB ports.
Camera 2: Select the camera from the drop
-
down menu, if unable to find any make sure that the USB cable from the camera is
plugged into any of the USB ports.
UTelligent Locking Address: Add the IP address of the UTelligent locking system into the text boxes and selecting the save icon
when complete. This will then display on the dashboard.
User Accounts
On first login to the device it will have a default login
(‘
Admin
’)
and password
(‘
Admin12$
’)
it is recommend to change the Admin
login password.
To add a new user select the Add User button at the bottom of the table then fill the fields with the required information. .
There are 5 levels of access
-
R (Read
-
only user) can only access DASHBOARD TAB
RC (Read
-
only + camera user) can only access DAS Camera TAB
W (Write user) access to all TABs other than Camera and EMS settings TAB
WC (Write and Camera user) can access almost all TABs other than EMS Settings TAB
S (Super
-
user) can access all TABs
Once completed select
‘
Save Settings
’.
Passwords must be a minimum of 8 characters with at least 1 number and 1 upper case letter.
If the account is not required there are two options depending on the situation. If the user is no longer needed for the foreseeable
future the account can be removed by selecting the bin icon in the users row. The other option is to deactivate the account in the
event that it needs to be suspended, this is achieved by selecting the tick icon on the users row. To reactivate it, select the cross
icon. These options can only be performed by the admin account or super user.
Change the email address of the account by editing the text field under email and select save icon when finished, this is the same
for the Access level. Enter the user rights by the corresponding letters list in on information panel and selecting save once
completed, a confirmation pop up will appear if correct. If incorrect entries have been entered a different pop up will appear
showing error inputs.