EDGE-3
Soundproof MDC O&M
Page 14
Installation
Mounting angle adjustments
The mounting angles are factory fitted by default to 700mm. Both front and rear mounting angles are adjustable but it
is advised to move the rear mounting angles to accommodate longer IT equipment.
Adjusting the mounting angles
This task can only be performed when there is no IT equipment inside of the cabinet.
A Philips screwdriver and a 10mm spanner is needed to perform this task.
1. Take off both side panels to gain access to the depth support rails by opening both front and rear doors, turn
the cam locks on the side panel to undo them from each depth support.
2.Use a Philips screwdriver and 10mm spanner (not provided) to remove the infill panels from the 3 depth sup-
port members.