![background image](http://html.mh-extra.com/html/usystems/edge-3/edge-3_o-and-m-manual_1064761019.webp)
Page 19
Installation
Gland plates
The EDGE
-
3 has 6 gland plates which are removable. It is advised not to remove the gland plates during operation as this will cause
issues with air recirculation and potential hot spots.
To remove the gland plate unscrew using a Philips head screw driver while holding onto the nut to avoid dropping if removing from
the top frame. Gland plates are put in tightly to create a seal so it can be stiff removing and place back in.
To ensure optimum running efficiency it is important that seal integrity is maintained by utilising either cable entry system (page
18) or other forms of cable grommets.
Gland plates