![background image](http://html.mh-extra.com/html/usystems/edge-3/edge-3_o-and-m-manual_1064761022.webp)
EDGE-3
Soundproof MDC O&M
Page 22
Installation
EDGE
-
3 DAX kit
The EDGE
-
3 DAX
‘
Direction Airflow eXhaust
’
kit is available to control the hot airflow exhaust from the active rear doors. Please see
data sheet for more information. Not available on 12U EDGE
-
3.
Remove the gland plate located at the top of the cabinet to the rear.
Keep the M6 fixings safe as these will be required later.
Stage 1
Stage 2
Locate ventilation interface to rear of cabinet lid lining up entry holes in
both parts, ensuring that the gasket seals against lid edges.
Refit gland plate re
-
using M6 fixings. Alternatively use the cable entry
system, which will also assist clamping down of the retrofit ventilation
interface.