Uson sprint iq, Руководство пользователя

Страница: 103 / 122

Reference
101
as RS-232 to communicate. The interface is setup in the
Serial Port Menu reached through the Hardware Menu.
I/O (Input/Output) : Devices or connections used by
computers and Sprint iQ to communicate with other
devices such as Programmable Logic Controllers (PLCs).
See PLC
Jump : In the Test Parameter Menu use the Jump Menu to link
programs in a variety of ways.
Keypads : The six blue buttons on Sprint iQ’s front panel used
to enter program values and other setup information.
LCD : Abbreviation for liquid crystal display. Sprint iQ’s
display is an LCD device that provides setup prompts,
menu options, test results, and other system information.
Leak Rate : A pressure drop over time can be stated as a leak
rate. For example -0.02 psi per second is a leak rate. A
leak rate can also be stated in flow units, such as 4 cc/
minute.
Leak Test : See Pressure Decay Test, Flow Test.
Line Conditioner : An optional device external to Sprint iQ
that filters out noise from the AC power line input. Line
conditioners are especially useful when Sprint iQ is
connected to automated machines that produce electrical
noise.
Linked Programs : Two or more programs can be linked
(consecutively connected) to perform multiple actions
during a single test cycle. For example, a flow program
can be set to follow a decay program so that when the
operator presses the START switch, Sprint iQ runs
through a flow test then goes to a decay test. If the product
goes out of parameter at any point in either test, the fail
light turns on and the test ends.