Visit us online at www.USWaterSystems.com Give us a call at: 1-800-608-8792
23
GreenWave Water Conditioning System
GreenWave Module Replacement
1. Turn off the feed water and relieve the pressure at a faucet or spigot downstream.
2. Use the supplied wrench to remove the GreenWave module sump.
3. Remove the empty GreenWave cartridge from the GreenWave module sump and discard.
4. Install the GreenWave cartridge back into the sump. Be sure the O-ring is in place and lubricat-
ed with food grade silicon grease or corn or vegetable oil.
NOTE: DO NOT
use petroleum based grease!
5. Install the GreenWave module sump and tighten it hand tight. Then turn it an additional 1/4 turn
to snug it further.
6. Open a faucet or spigot down stream and slowly turn on the water supply.
7. Allow the GreenWave module to fill with water then check it for leaks.
8. If there are no leaks, run the water unit it is clear then shut off the faucet or spigot.
9. The system is now operational. Be sure to check for leaks one final time.
