US Shift Quick 4, Руководство пользователя, Страница: 4 / 12

4
SEL = Manual Select
In status mode, double-clicking the function knob will activate or deactivate
manual selection mode. SEL will be displayed for 2.5 seconds, then return to the
normal status screen. Like Manutronic mode, this mode enables manual gear
selection and includes safety features to prevent inappropriate downshifts.
Manual selection mode is intended for diagnostic purposes, so it does not have all
of the optional features of Manutronic. No additional connections or configuration
options are required to use manual selection mode and the desired gear may be
selected by rotating the function knob clockwise to up-shift or counter-clockwise to
down-shift. Manual selection mode remains active until the function knob is
double-clicked again or until the ignition is turned off.
AUt = Automatic Select
Indicates that you have left manual gear select mode and are back in automatic
transmission mode. When in manual select mode, click the function knob to return
to automatic mode. AUT will be displayed for 2.5 seconds, then return to the
normal status screen.
SPd = Speed
Indicates vehicle speed (from the output shaft speed sensor or vehicle speed
sensor) in MPH. (KPH if the metric system is selected in the system settings of
the tuning software.)
tPS = Throttle Position Sensor
Indicates throttle position sensor value in volts.
ºF/ºC = Transmission Fluid Temperature
Indicates current transmission fluid temperature in degrees Fahrenheit (or Celcius
if using metric). The degree symbol is represented on the display by a raised
lower-case "o".
tAC = Tachometer
Indicates engine RPM. 0-999 RPM is displayed as actual RPM. Above 1000 RPM
will be displayed with a decimal. (2.30 = 2300 RPM)
bAt = Battery
Indicates vehicle battery condition in DC volts.