Courier
I
-modem 3
How to Tell if x2 is Enabled in Your I-modem
If you aren’t sure whether x2 is enabled in your Courier I-modem, use the
ATI7
command to display product configuration information. If x2 is enabled
on your Courier I-modem, the following information displays:
USRobotics Courier I-modem Configuration Profile...
Copyright, 19xx-96, U.S. Robotics. All rights reserved.
Product type US/Canada External
Options HST,V32bis,Terbo,VFC,V34+,x2
Fax Options Class 1,Class 2.0
Clock Freq 20.16Mhz
Eprom 256k
Ram 32k
Supervisor date 01/16/97
DSP date 01/16/97
Supervisor rev 7.0.0
DSP rev 2.0.0
Serial Number {serial number}
OK
Note:
Dates, serial numbers, and revision numbers may vary. The most
important line is the “Options” line, which lists support for x2.
