Document Title: Operating Instructions for the US Conec
Loose Fiber Ribbonizing Tool
Document Number: AEN-1408 Rev 2.0
8 of 10
4.5
Repeat steps 4.3 and 4.4 for the other side of the ribbon.
4.5
4.6
4.6
Slide your finger across the ribbon lying in the tray. Repeat several times,
increasing pressure with each pass.
4.7
For multi-leg cables (24, 48, or 72 fiber units), number the ribbonized fiber ribbon
(1, 2, 3, 4, or A, B, C, D, etc.) before removing it from the fiber tray.
4.8
Slowly rotate the stacker to the vertical position while gently sliding the end of
the tweezers under the ribbon in order to remove it from the tray.
4.8a
4.8b
4.9
Remove the shim from the stacker and gently remove the fiber ribbon.
