Document Title: Operating Instructions for the US Conec
Loose Fiber Ribbonizing Tool
Document Number: AEN-1408 Rev 2.0
6 of 10
3.2.7 Thoroughly clean the fibers with 99.8% pure isopropyl alcohol and lint-
free wipes. Use caution to not break fibers.
3.2.8 Position the fibers into the fiber tray.
3.2.8.1
Rotate the stacker down to the horizontal position.
3.2.8.2
Gently slide your finger along the fiber tray in the direction
of the opposite end of the tool, aligning the fibers in the
proper order in the tray.
NOTE:
Repeat as necessary until the fibers are lying smoothly in
the tray.
3.2.8.2
4.0
Fiber Ribbonization
4.1
Cut a piece of Scotch
®
810 Magic
™
Tape approximately 60 mm long.
4.2
Apply the tape to the tray, covering the fibers and securing them into position.
Keep the tape approximately centered along the tray. Lightly slide your finger
along the tape as it covers the fibers aligned in the tray.
