US Conec Loose Fiber Ribbonizing Tool, Записки инженера-прикладника

Страница: 2 / 10

Document Title: Operating Instructions for the US Conec
Loose Fiber Ribbonizing Tool
Document Number: AEN-1408 Rev 2.0
2 of 10
THE USE OF SAFETY GLASSES FOR EYE PROTECTION IS RECOMMENDED
1.0 Document Purpose
This document describes the procedure for ribbonizing loose fibers using the US Conec
loose fiber ribbonizing tool and ½” Scotch
®
810 Magic
™
Tape.
2.0 Required Equipment and Materials

US Conec loose fiber ribbonizing tool

100 millimeter ruler or other measuring device

Permanent marker

½” Scotch
®
810 Magic
™
Tape

New razor blade or Xacto
®
knife

Isopropyl alcohol, 99.8% pure

Lint-free wipes

Tweezers

Fiber optic side cutters
3.0 Ribbonizer Operating Instructions
3.1 Cable Preparation
3.1.1 Prepare the cable for ribbonization according to the manufacturer’s
instructions or for the termination type being used.
3.2 Fiber Preparation
3.2.1 Raise the ribbonizing tool’s fiber stacker into the vertical position and
remove the fiber shim.