Document Title: Operating Instructions for the US Conec
Loose Fiber Ribbonizing Tool
Document Number: AEN-1408 Rev 2.0
5 of 10
3.2.4
3.2.5
3.2.5 Gently slide the fibers from right to left and back several times to allow
the fibers to settle into position as they exit the jacket. Pull the fibers so
that the end of the jacket is snug against the opposite side of the stacker.
3.2.6 Push the shim down until it contacts the top fiber in the stacker and
compacts the fibers into a ribbon.
NOTE:
Pushing the shim down too firmly will cause over-compacting of the
fibers resulting in fiber crossover and possible damage to individual
fibers.
3.2.6
3.2.7
