Urrea HG840 Скачать руководство пользователя страница 17

17

E N G L I S H •

User’s manual

· NEVER aim spray gun at people, animals, or 
plants.
· NEVER place hands in front of nozzle.
· Make sure hose and fittings are tightened 
and in good condition. Never hold onto the 
hose or fittings during operation.
· Do not allow hose to contact muffler.
· Never attach or remove wand or hose fittings 
while system is pressurized.
· Use only hose and high pressure accessories 
rated for pressure higher than your pressure 
washer’s PSI.
· To relieve system pressure, shut off engine, 
turn off water supply, and pull gun trigger un-
til water stops flowing.
· DO NOT allow CHILDREN to operate pressure 
washer.
· NEVER repair leaking connections with seal-
ant of any kind. Replace o-ring or seal.
· NEVER connect high pressure hose to nozzle 
extension.
· Keep high pressure hose connected to pump 
and spray gun while system is pressurized.
· DO NOT secure spray gun in open position.
· DO NOT leave spray gun unattended while 
machine is running.
· NEVER use a spray gun which does not have 
a trigger lock or trigger guard in place and in 
working order.
· ALWAYS be certain spray gun, nozzles and ac-
cessories are correctly attached.

 DANGER: RISK OF CHEMICAL BURN.

• Use of acids, toxic or corrosive chemicals, 
poisons, insecticides, or any kind of flammable 
solvent with this product could result in seri-
ous injury or death.
· Do not use acids, gasoline, kerosene, or any 
other flammable materials in this product. 

 

Use only household detergents, cleaners and 
de greasers recommended for use in pressure 
washers.
· Wear protective clothing to protect eyes and 
skin from contact with sprayed materials.
· Do not use chlorine bleach or any other cor-
rosive compound.

 DANGER: RISK OF HOT SURFACES.

• Contact with hot surfaces, such as engines 
exhaust components, could result in serious 
burn.

During operation, touch only the control sur-
faces of the pressure washer. Keep children 
away from the pressure washer at all times. 
They may not be able to recognize the hazards 
of this product.

 DANGER: RISK OF MOVING PARTS.

• Starter and other rotating parts can entangle 
hands, hair, clothing, or accessories.
· NEVER operate pressure washer without pro-
tective housing or covers.
· DO NOT wear loose clothing, jewelry or any-
thing that may be caught in the starter or oth-
er rotating parts.
· Tie up long hair and remove jewelry.

 DANGER: RISK OF EYE INJURY.

• Spray can splash back or propel objects.
· Always wear safety goggles when using this 
equipment or in vicinity of where equipment 
is in use.
· Before starting the pressure washer, be sure 
you are wearing adequate safety goggles.
· NEVER substitute safety glasses for safety 
goggles.

FEATURES

KNOW YOUR TOOL

Before attempting to use this product, become 
familiar with all of its operating features and 
safety requirements.

1. Nozzles.
2. Spray gun.
3. Muffler.
4. Fuel tank 
5. Choke lever.
6. Fuel valve. 
7. Hand cord.
8. Air filter.
9. Detergent tank cap.
10. Detergent tank.
11. Fuel tank cap.
12. Throttle lever.
13. Engine switch.
14. Oil dipstick.
15. Thermal relieve valve.
16. Inlet of pump.
17. Pressure hose.
18. Spark plug.

HG840 manual.indd   17

02/02/16   5:29 p.m.

Содержание HG840





























Отзывы: