sec.3g
−−−−
11
2 VOICE - Technical Manual
ELEKTA AND ELEKTA STEEL CALL MODULE
2VOICE ELEKTA CALL MODULE Ref. 1083/15 (50Hz) – 1083/25 (60Hz)
2VOICE ELEKTA STEEL CALL MODULE Ref. 1083/16 (50Hz) – 1083/27 (60Hz)
PROGRAMMING
The page shown here by the side will
appear if the module is con
fi
gured to
use logical codes (see Con
fi
guration
paragraph).
Combine the LOGICAL CODE which
identi
fi
es the apartment.
The code is formed by a number up to
four digits long (permitted values: 1 ÷
9999).
The same code may be allocated to
different names, providing they share the
same physical code.
Two different logical codes may be
allocated to different names which share
the same physical code.
Set the logical code using the keypad
and press
OK
to con
fi
rm.
Press
C
on the short-cut menu to enter
the digit to the left of the cursor if you
make a mistake. The cursor can be
moved onto the numeric string using the
and
buttons.
The page shown here by the side will
appear and the keypad will be deactivated
for approximately three seconds if the
code is incorrect.
A DOOR CODE may be paired to the
name, if required.
It is not necessary to pair each name to a
door code, but it is not possible to allocate
the same code to different names.
Press
C
on the short-cut menu to enter
the digit to the left of the cursor if you
make a mistake. The cursor can be
moved onto the numeric string using the
and
buttons.
The page shown here by the side will
appear and the keypad will be deactivated
for approximately three seconds if the
code is incorrect.
The new user will be added to the database and
the system will go back to the NAMES menu.
Modify
To edit a name or the parameters paired
to it, select the name to be edited using
the
buttons and press
OK
to
con
fi
rm.
The procedure is the same as that
described for adding new names: the
stored values will be shown for each
parameter. Press
OK
to con
fi
rm directly
or edit as needed.
Delete
To delete a name and the parameters
paired to it (physical code, logical codes
and door codes), select the name to be
edited using the
buttons and press
OK
to con
fi
rm.
Press
OK
to con
fi
rm deletion or press
X
to cancel it.
IMPORTANT:
The deletion operation
cannot be undone.
Delete all
Press
OK
to delete the entire database
containing names and paired parameters
or press
X
to cancel the operation.
IMPORTANT:
The deletion operation
cannot be undone.
