12
−−−−
sec.3g
2 VOICE - Technical Manual
ELEKTA AND ELEKTA STEEL CALL MODULE
DOOR OPENER
The second level DOOR OPENER code can be used to con
fi
gure
up to 100 door codes which are not linked to any name or physical
code. These codes may be used by maintenance personnel, for
instance.
The menu can be used to add new codes, edit exiting codes and
delete one or all codes from the database.
Select DOOR OPENER from the main
menu. The menu shown here by the side
will appear. Select the required function
with the
buttons and press
OK
to
con
fi
rm.
New
Enter the new DOOR CODE using the
keypad and press
OK
to con
fi
rm. The
code must be four digits long (permitted
values: 0001 ÷ 9999).
Press
C
on the short-cut menu to enter
the digit to the left of the cursor if you
make a mistake. The cursor can be
moved onto the numeric string using the
and
buttons.
The page shown here by the side will
appear and the keypad will be deactivated
for approximately three seconds if a code
which is already present is con
fi
rmed.
The page shown here by the side will
appear and the keypad will be deactivated
for approximately three seconds if the
code length is incorrect.
The new code will be added to the
database and the system will go back to
the DOOR OPENER menu.
Modify
Select a code to be edited with the
buttons and press
OK
to con
fi
rm.
The procedure is the same as that
described for adding new codes.
Delete
Select a code to be deleted with the
buttons and press
OK
to con
fi
rm.
Press
OK
to con
fi
rm deletion or press
X
to cancel it.
IMPORTANT:
The deletion operation
cannot be undone.
Delete all
Press
OK
to delete all door codes or
press
X
to cancel the operation.
IMPORTANT:
The deletion operation
cannot be undone.
KEYS (function available only for models 1083/15 and 1083/16)
The second level KEYS menu can be used to acquire new
transponder keys and delete one or all keys acquired by the calling
module.
Select KEYS on the main menu. The
menu shown here by the side will appear.
Select the required function with the
buttons and press
OK
to con
fi
rm.
2VOICE ELEKTA CALL MODULE Ref. 1083/15 (50Hz) – 1083/25 (60Hz)
2VOICE ELEKTA STEEL CALL MODULE Ref. 1083/16 (50Hz) – 1083/27 (60Hz)
PROGRAMMING
