10
−−−−
sec.3g
2 VOICE - Technical Manual
ELEKTA AND ELEKTA STEEL CALL MODULE
2VOICE ELEKTA CALL MODULE Ref. 1083/15 (50Hz) – 1083/25 (60Hz)
2VOICE ELEKTA STEEL CALL MODULE Ref. 1083/16 (50Hz) – 1083/27 (60Hz)
PROGRAMMING
Select the
T
or
P
icon which will appear
over the right short-cut menu using
the
buttons to indicate that the
postman function is available and press
OK
to con
fi
rm.
The icon will only appear on
the display during the times
when the postman function is
enabled.
Select the VOCAL SYNTHESIS function
with the
buttons and press
OK
to
con
fi
rm.
If this function is activated, calls and
door opening events will be described
by speci
fi
c voice messages in the set
language.
The function is available only
if the calling module was
con
fi
gured as PRIMARY.
Select YES with the
buttons if a
SWITCHBOARD is present in the system
and press
OK
to con
fi
rm.
NAMES
The second level NAMES menu is used to add new names, edit
existing names, and to delete one or all names from the database.
Select NAMES from the main menu. The
menu shown here by the side will appear.
Select the required function with the
buttons and press
OK
to con
fi
rm.
New
Enter the new NAME using the keypad
(special characters can be added like
on a mobile phone by pressing buttons
1 and 0) and press
OK
to con
fi
rm the
entered name.
The name may be up to 32 characters
only. Press
C
on the short-cut menu to
enter the digit to the left of the cursor if
you make a mistake. The cursor can be
moved onto the string using the and
buttons.
The page by the side will appear if name
already exists and the keypad will be
deactivated. The previous page with the
fi
eld empty will appear after approximately
three seconds.
Combine the PHYSICAL CODE which
identi
fi
es the apartment to the newly
entered name. The physical code is
fi
ve
digit long (XXYYY), where:
XX identi
fi
es the riser number
(permitted values: 00 ÷ 31).
YYY identi
fi
es the apartment number
(permitted values: 000 ÷ 127).
The same code may be allocated to
different names.
Set the physical code using the keypad
and press
OK
to con
fi
rm.
Press
C
on the short-cut menu to enter
the digit to the left of the cursor if you
make a mistake. The cursor can be
moved onto the numeric string using the
and
buttons.
•
•
If the code has already been used for
another name, a new screen will open to
ask for recon
fi
rmation.
The page shown here by the side will
appear and the keypad will be deactivated
for approximately three seconds if the
code is incorrect.
(*Annex)
