DS1092-229
27
5.5.8
POWER ON ACTION SUBMENU OF MOTION SUBMENU
Option
Value
Explanation
ACTION
NONE/PRESET/VECTORSCAN/
PATTERN/PANSCAN/AUTOSCAN
This option allows to select the action to be activated.
NUMBER
PRESET: 1/64
VECTORSCAN: 1/7
PATTERN: 1/6
PANSCAN: 1
AUTOSCAN: 1
This option allows to define in detail which single action
has to be activated. The single action number that can be
selected changes according to the previously selected
action (from 1 to 255, except the not programmable ones
for the Presets; from 1 to 6 for VectorScan; from 1 to 3 for
Patterns, 1 for PanScan, 1 for AutoScan). The selection of
the desired number is possible by pressing the button
IRIS+ and going to the respective screen.
RETURN
Closes OSD menu.
5.5.9
LIMIT OPERATION SUBMENU OF MOTION SUBMENU
This option allows to reduce the dome operation limit, according to the previously indicated action to be automatically
performed (see below).
Option
Value
Explanation
PAN START POSITION
0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN/TILT start position
coordinates for the zone. By pressing IRIS+ and selecting with
the arrow buttons the end position frame to be stored for the
zone, it is possible to see on the monitor also the coordinates
of the displayed frame. Press again IRIS+ to confirm the zone
start position storing.
PAN END POSITION
0,0 ÷ 359,9 ÷ 0,0 ÷ 90,0
This option allows to store the PAN/TILT zone final
coordinates. By pressing IRIS+ and selecting with the arrow
buttons the end position frame to be stored for the zone, it is
possible to see on the monitor also the coordinates of the
displayed frame. Press again IRIS+ to confirm the storing of
the zone end position.
DIRECTION
LEFT/RIGHT
This option allows to select the motion direction of the dome
(Left, Right).
OPERATION
ON/OFF
If set to ON, this option allows to activate the function.
RETURN
Closes OSD menu.
POWER ON ACTION
1 Action OFF
2 Number 1
3 Return
LIMIT OPERATION
1 Pan Start Position 0.0
2 Pan End Position 0.0
3 Direction Right
4 Operation OFF
5 Return
