39
DS1168-013C
– V.x.y.z-w
(**) (e.g.
): to see
the firmware version of each single device connected to the audio
or audio-vi
deo door unit.
(**) V.x.y.z-w is the SW version of the display.
B.10. After completing the changes, save and send the configuration to the device with the control
on the TRANSFER
web page.
The browser returns the followin
g scr
eens:
1)
2)
B.11. By pressing on the controls
, the web page with the indication
is returned, therefore close the browser.
B.12. In the meantime, the device has rebooted.
4.1.1 SETTINGS PAGE
The following default settings will be present at the opening of the web page:
DOOR UNIT TYPE: MAIN
All parameters are described below:
The parameters marked with (#) are displayed only if the door unit is an audio-video model (Ref. 1083/48).
The parameters marked with (&) are displayed only if the door unit is an audio model with CCTV (Ref. 1083/39).
DOOR UNIT TYPE
This parameter is used to set the door audio and audio-video door unit as primary or secondary. All the users in
the system may be called from the main door unit. A secondary door unit may only call the users of the riser to
which it belongs. Users who receive the call can identify the source of the call by the tone.
If the value “SECONDARY” is selected, new parameters are displayed on the web page and are
described in chapter DOOR UNIT TYPE: SECONDARY.
MAIN DOOR UNIT ADDRESS
Set the identification number (ID) of the door unit to a value from “0” to “3”. No two main units can have the same ID.
DOOR OPENER TYPE
This is used to manage lock door opener mode; possible options are “FREE” or “SECRET”.
In “SECRET” mode, the electric lock may only be activated by pressing the door opening button on the calling
station when an audio conversation has been established or when after having received a call or auto-on function
either a video connection has been established.
In “FREE” mode, instead, the apartment station door opener button will only open the door unit electrical lock only
if the door unit is configured as main or the user belongs to the same door unit column. This column is defined by
the secondary door unit ID setting. This function is typically used for secondary stations.
The above applies to the vehicle (gate) and pedestrian gate electrical lock.
AUTO-ON / INTERRUPTIBLE INTERCOM
When an auto-on or intercom conversation is in progress, the concerned column or the entire system will be busy
but can be interrupted (according to the configuration of this parameter) by a call from the door unit (if “YES” is
selected).
The parameter must be programmed in the same manner on all calling stations in the system.
