54
DS1168-013C
• Then hold the BUTTON (7) pressed for longer than 10 seconds.
The door unit will generate two 2-second long beeps and all parameters will be reset, including advanced
call button configurations, before exiting configuration state.
2) Display module (Ref. 1168/1)
• Type "
9
" on the numeric keypad until the following password entry screen appears on the display.
• As soon as the user starts typing the code, the following will appear on the screen:
Once the code is entered, it must be confirmed with control
(while the one with the icon
deletes
the character on the left of the cursor).
The default password for the device is 1937 and can be modified by the user by accessing the configuration
web pages via the terminal.
If the password you entered is incorrect, a screen like the one shown below will appear on the display:
• After confirming the password on the display, the following screen appears on the display while the
keypad module, and any other connected modules, start flashing:
