49
DS1761-005
OPENING THE DRIVEWAY GATE
1. In stand-by
•
Perform 1 movement when the display is off.
•
Finally, perform 3 movements with the display on.
2. During audio operation
•
Perform 3 movements during a video door phone conversation with a calling station.
SWITCHBOARD CALL
•
Perform 1 movement when the display is off.
•
Finally, make either 4 movements or 1 movement pausing longer than 1 second on the sensor, with
the display on.
AUTO-ON FUNCTION
•
Perform 1 movement when the display is off.
•
Repeat the operation with the display on.
VIDEO SWITCHING
Waiting for an answer (while receiving a call)
•
Make 1 movement on the slave video door phone where you want to see the caller’s image while
receiving a call.
VIEWING THE CAMERAS OF ANY ADDITIONAL CALLING STATIONS
In auto-on mode
•
Perform 1 movement when the display is off.
•
Repeat the operation with the display on.
•
Finally, perform 1 movement when the display shows the image taken from the calling station.
The video door phone will emit a Beep as confirmation that the function is activated.
7. ACCESSING THE CONFIGURATION MENU
To access the device configuration menu, press and hold key
or at least 5 seconds.
Access to the configuration menu is confirmed by a beep
emitted by the device and by the visual indication
of the LED of key
that s
tarts flashing orange.
The configuration menu is divided into 3 screen pages. On the first screen page, you can configure the
following parameters:
SCREEN PAGE 1
The second parameter configuration screen page can be displayed by pressing key
.
