45
DS1761-005
5.7. AUTO-ON FUNCTION
The auto-on function allows viewing the image taken from all the calling stations installed in the topological
path on the video door phone display. When the video door phone is in stand-by,
press key
, to display the image taken from the calling station. Press the key again to move to any
subsequent calling stations installed in the system.
Press key
3
to stop the auto-on function and return to the Homepage.
Press key
to open the pedestrian door of the displayed calling station.
Press key
to start an audio and video communication with the displayed calling station. Press key
again to disable the auto-on function.
It is not possible to enable the auto-on function on any RTSP cameras present in the system.
5.8. FLOOR CALL
If a floor call is received, the video door phone starts ringing with the ringtone chosen by the user.
The function is only available if a key has been connected to the “FC” terminals
5.9. ADJUSTMENTS ON THE OSD MENU (ON SCREEN DISPLAY)
To access the OSD menu, press key
during a video call or in auto-on mode. The following screen page
will be displayed:
Adjust the following parameters in the OSD menu:
1) Display video brightness
2) Loudspeaker volume
The parameters are adjusted by pressing keys
2
,
3
,
and
that increase or decrease the
adjustment value of the single parameter.
Press key
to exit the OSD menu.
5.10. MUTE FUNCTION
This function allows disabling the call ringtone on the video door phone and any additional ringtones
connected. The function can be activated in 2 different ways:
•
MUTE 8h: by pressing key
3
for a long time, the video door phone will be muted for up to 8 hours.
After a possible blackout, the MUTE 8h function will restart as if it had just been activated.
•
MUTE (no time limit): by pressing key
3
for a short time the video door phone will be muted until the
same key is pressed again.
