41
DS1761-005
5.1.1 RECEIVING AND ANSWERING A CALL WHILE “REMOTE”
MODE IS ON
If the “Remote” mode is on when receiving a call, the video door phone display does not show the caller’s
image but the following screen page:
Press key
to display the caller’s image on the video door phone you want to use to answer.
Press key
3
to reject the incoming call.
Press key
to pick up the call (the key LED starts flashing). Press the key again to end the call and the
display turns off.
If the call forwarding function has been configured and activated with “Remote” status active,
the smartphones on which the CallMe App was installed will also ring in addition to video door
phones.
5.2. RECEIVING AND ANSWERING AN INTERCOM CALL
When the video door phone receives an intercom call, it rings and turns on the display, which is normally off.
The display does not show the caller’s image. You can see the caller’s image only after picking up the call
and only if the caller enables the video function from a video door phone with front-facing camera.
Press key
3
to reject the incoming call.
Press key
to pick up the call (the key LED starts flashing). Press the key again to end the call and the
display turns off.
