urmet domus 1093/061S, Быстрое руководство

Страница: 45 / 140

The following window will appear:
Figure 32: recording menu
The selected item is highlighted.
Press arrows “
◄► ” to point the cursor to the various menu items.
Press “ ESC ”. to quit the menu.
e
IMPORTANT NOTE
•
The device will resume recording only recording tasks programmed in the R ecording menu after a blackout.
Recordings started manually will not be resumed after a blackout.
3.1.1 CHAN
This item (not selectable) lists all the channels of the device.
3.1.2 STATUS
This item (not selectable) shows the status of each video channel by means of a series of LEDs.
The following modes can be displayed:
→
the channel is not active
green
→
the channel is recording (manual, real time, motion detection, external alarm)
red
→
transmitting on the network
amber
→
recording and transmitting on the network
3.1.3 START/STOP
This option is used to start/stop the recording on a certain video channel.
To set, select the respective check box using “
◄► ” and press “ ENTER ” or “ EDIT ”.
Symbol “ ” indicates that recording can be started on a selected channel; symbol “ × ” indicates that the recording can be
stopped.
The following will light up on a channel when recording is started:
pink icon on the camera status bar shown on the monitor.
3.1.4 START ALL
Select this option and press “ ENTER ” or “ EDIT ” to start recording all video channels at the same time.
3.1.5 STOP ALL
Select this option and press “ ENTER ” or “ EDIT ” to stop recording all video channels at the same time.
e
IMPORTANT NOTE
To proceed with manual recording:
the user must have the corresponding privileges
at least one hard disk must be installed in the device
the hard disk must be formatted
DS1093-022 45