6
−−−−
sec. 4e
2 VOICE - Technical Manual
CALL FORWARDING DEVICE
CONFIGURATION
DEVICE CONFIGURATION FROM THE URMET
CALLME APP
In order to con
fi
gure the device, you must
fi
rst have created an
account (or logged in using an existing account).
WARNING:
the device, once fully operational, will forward calls to
the owner of the account that is used in the con
fi
guration step. It
is therefore necessary to use the account of the end user during
con
fi
guration operations.
From the Home Page, (with the green dot displayed and chain
closed ) select the “Settings” key.
You will display:
Settings Menu
From here, select “Con
fi
gure device” 1 .
Follow the directions supplied
(2)
and press “Continue”:
(2)
WARNING:
the
fi
rst time the device is turned on it will take about
50 seconds before the LED starts
fl
ashing.
Con
fi
guring Instructions
After selecting “Continue” you must turn on the Wi-Fi on your mobile
phone, and access the Wi-Fi network created by the device. Key in
the suggested password. (WARNING: Do not forget to enter the dash
sign ‘-’ between the required two identical repeats).
1
2
Password Info
On the next page you will be able to choose the name that you wish
to give to your device (the name that will be displayed as ‘Caller’ when
you receive an incoming call). We recommend setting your home
address (street or city name) as the device name. Now press “Enter”
and then “Continue”.
Enter the device name
To operate, the device must be connected to
your home LAN network and this in turn must be
connected via a modem/router to the Internet.
The connection to your home LAN can be achieved via
wire or by hooking up to your home Wi-Fi.
Choose which type of connection you wish to use - either “Wire” or
Wi-Fi (“Wireless”).
Choose the connection type
CALL FORWARDING DEVICE FOR 2 VOICE SYSTEM Ref. 1083/58
CONFIGURATION
