12
−−−−
sec. 4e
2 VOICE - Technical Manual
CALL FORWARDING DEVICE
b. now press the button 3 to be programmed and wait for a
con
fi
rmation tone from the indoor station.
BEEP
3
4. On your smartphone, open the pedestrian access door.
5. On the indoor station:
a. a beep sound will con
fi
rm that programming has been
successfully completed;
b. now hook up the handset of the indoor station - which will
beep to con
fi
rm programming mode quitting.
6. On your smartphone, end the current conversation.
7. To check the programmed function:
a. lift the handset off the hook at the indoor station and press
the programmed key;
b. check for the presence of the call on your smartphone and
of a voice feedback when you answer.
For intercom call programming in the following video door
phone models:
mod. Aiko ref. 1716/1 and 1716/2
mod. Modo ref. 1717/12H
please refer to the chapter“(Audio/Video) Settings \ Video
door phone directory \ Adding a record to the directory”
contained in the instruction manual supplied with the
product.
TECHNICAL SPECIFICATIONS
Input voltage from BUS line: ...................................................
48 V
External input voltage: ...........................................................
24 V
Maximum absorption: ...........................................................
200 mA
Absorbed power in operation: ..............................................
max 6 W
Operating temperature: .....................................................
-5 ÷ +45 °C
23 ÷ +113 °F
Max humidity: .........................................................................
95% RH
Ethernet interface: ..........................................................
10/100 Mbps
Wi-Fi: ...............................
2.4 Ghz (conforms to IEEE 802.11 b/g/n)
with internal antenna
Dimensions (LxHxD): ................
140 (~8 DIN modules) x 90 x 60 mm
5.51 x 3.54 x 2.36”
The product is designed to be powered off a BUS
line or external supply Ref. 1083/24, via 24V (6 W,
24
V ) terminals, with power supply up to the
speci
fi
ed power source requirements (LPS) and
protected against short circuits and overcurrents
according to EN 60950-1:2006+A11+A1+A12+A2
provisions.
KEY TO SYMBOLS
Symbol Description
Direct input voltage
Video door phone system trademark
DANGER - Presence of safety-critical components
CONNECTION DIAGRAMS
SYSTEM WITH CALL FORWARDING DEVICE
POWERED OFF BUS LINE
IN-OUT connection on the call forwarding device.
SV124-1315
2
2
2
JP V.INT/V.EXT.: V.INT
JP Z: OFF
A1
C
B
D
E
F
DIP1: OFF
MASTER
LINE
2
LINE
1
3
LINE
LINE
4
LINE OUT
LINE IN
24Vdc
-
+
LAN
LINE
OUT
IN
LINE
LINE
IN
CP
S-
S+
LINE
OUT
CFW
IN-OUT connection on the video door phone.
SV124-1312
DIP1: OFF
MASTER
2
2
2
2
2
2
JP V.INT/V.EXT.: V.INT
JP Z: ON
A
C
D
A
F
E
A
B
LINE
2
LINE
1
3
LINE
LINE
4
LINE OUT
LINE IN
LINE
IN
CP
S-
S+
LINE
OUT
24Vcc
-
+
LAN
LINE
OUT
IN
LINE
LINE
IN
CP
S-
S+
LINE
OUT
CFW
LINE
IN
CP
S-
S+
LINE
OUT
KEY TO DIAGRAMS
A
Video door phone mod. Miro for 2Voice Adapter for
video door phone (IN-OUT connection) Ref. 1750/50
A1
Video door phone mod. Miro for 2Voice system
B
To router/modem ADSL or 3G/4G
C
Optional:
fl
oor call button
CFW
Call Forwarding device for 2Voice system Ref. 1083/58
D
From the riser column
E
To the riser column
F
4-user distributor Ref. 1083/55
CALL FORWARDING DEVICE FOR 2 VOICE SYSTEM Ref. 1083/58
TECHNICAL SPECIFICATIONS - CONNECTION DIAGRAMS