DS1093-176
35
Firmware upgrade
¾
Refer to URMET S.p.A. Customer Service Technical Assistance periodically to check availability of firmware
upgrades.
Network configuration
¾
Camera default setting is DHCP mode. If the network does not support dynamic addressing (DHCP), the
device will automatically switch to factory IP 192.168.1.168. Use Urmet “
“EasyTool
” software to modify the
IP address and other network settings to prevent any conflict with other devices on the network.
¾
Once the camera is correctly connected and configured on the IP network it will be possible to show video
and settings on any PC or smartphone.
Network connections
¾
When connecting a PC (using Software Client or Browser), any video channel on the PC will be using
“unicast” connection (TCP, RTP, UDP).
¾
The device can support up to 5 “unicast” connections so it is possible to show the video on maximum 5
remote devices (PC or smartphone) at the same time depending on the available network band.
