Urive Albatross II MD-7500P, Руководство пользователя

Страница: 47 / 65

20. Black-box configuration - Screen setting
1. When the screen setting tab is selected, users can determine whether to
use the PIP function, the screen saver and the rear video shift function.
2. PIP Mode : Functions to check live videos of the front and rear view in a
LCD screen simultaneously. The use of this mode can be set.
3. Screen Saver : Functions to turn the current screen to a basic screen
displaying only information of a current time, GPS reception status, mute
status, event storage status, etc. after the set time has passed without any
input or touch action. As soon as you touch the basic screen that
screensaver is on, the basic screen turns back to the previous video screen
displaying video image of the front or rear view.
In the Screen saver status, if there is touch signal during 2 minutes, the LCD
is turned off automatically. When the device’s LCD is turned off, the main
device switch to screen saver mode by detecting any touch signal.
4. Rear video shift: This function is for shifting the rear side video stored in
the black box, between the left and right sides on the screen. Can be set to
enabled or disabled.
(Caution!) When the rear video shift function is set, the recorded rear video
can be shifted, while the rear video shown on the LCD screen will not be
shifted.
5. After completing selections of modes, press save button to save the
selected settings.
[ Screen setting]
47