Urive Albatross II MD-7500P, Руководство пользователя

Страница: 19 / 65

12. Installation of Urive Albatross II – Front camera
1
2
3
4
5
6
7
8
While the power is turned off,
connect the power cable, the
rear camera cable and the GPS
cable.
Connect the power cable
to the DC port
Following the intro screen,
precautions will be
displayed.
Turning on the power
switch will bring up an intro
screen.
When booting is completed,
the front video will be
displayed and the voice
notification, “Recording is
now in progress”, will be
heard at the same time
※ State check LED: Continuous mode – Green LED On / Parking mode – Green LED Off
※ Before building in the system completely, users must check whether the front and rear videos are stored normally.
Clean the spot on the front
window where the product is
installed.
Affix the Mount on the desired
point.
Installation of the power cables
must be conducted by the
authorized workshop.
- Black : GND, (ex) Car body
- Yellow : ACC, (ex) Cigar jack fuse
- Red : BAT(B+), (ex) Emergency light
19