Urban I212-L ISLA 90 INOX, Руководство пользователя

Страница: 49 / 81

22
Fig. 1: 5 Spd Dgt Switch
1. Press this button to turn on the product. Fig. 1
2. Press this button to reduce speed. Fig. 1
3. Dgt Display: You can see the operation rate of
product on this screen. Fig. 1
4. Press this button to increase speed. Fig. 1
5. When the timer button is pushed on, a timing
function shall be activated for a period of 15
minutes, and once the timing starts, the display
gives a signal, and the motor stops automatically
after 15 minutes. (Fig. 1)
6. Press this button to turn on or off the lamp.
(Fig. 1)
9.3 5 Spd Touch Button
10.4 Cleaning Periods of the Metal
Filters
The filters must be cleaned when "C" signal
appears on the display or (depending on
usage) after every 2-3 weeks. When the filters
are cleaned
and mounted in their places, press button
( ) for more than 3 seconds in order to de -
lete "C" signal (when the product is off). Letter
"E" will appear on the display, and the product
will switch to normal operation. If you would
like to resume operation without deleting “C”
signal, current speed shall be displayed for 1
second when you press ( ) button,
and motor shall resume operation with the “C”
signal appearing.
Push the button inside to set the device to the
required speed. Button shall come out with this
operation. Set the button to desired position and
push it inside again.
10.5 Push Pull Button
Fig. 1: 3 SPD PUSH PULL BUTTON
Fig. 2: 5 SPD PUSH PULL BUTTON