UPPAbaby Knox 1120-KNX-CA, Руководство пользователя

Страница: 44 / 92

42
1
Route vehicle lap/shoulder belt through the
REAR-FACING BLUE
belt path and buckle.
2
Ensuring there is no twisting in the vehicle belt,
route the lap belt ONLY under the
BLUE
REAR-FACING
Tensioning Plate.
3
Apply pressure into the seat bight and pull up
on the vehicle shoulder belt to remove all slack.
NOTE: As pressure is applied, the Tightness
Indicator window will turn from RED to GREEN .
To confirm a proper installation, the window
MUST be all GREEN . It is possible to achieve a tight
installation even if the indicator is not fully green.
Always check belt path for no more than
1" movement.
4
Holding the shoulder belt taut to ensure no slack
is introduced back into the vehicle belt, route the
shoulder belt under both tensioning clips.
NOTE:
The shoulder belt MUST route fully under the
tensioning clip furthest away from the buckle for a
secure installation. However, due to the angle of some
vehicle belts, if the shoulder belt closest to the buckle
does not slip fully under the clip, you will still be able
to achieve a proper installation.
REAR-FACING INSTALLATION
– Lap/Shoulder Belt Use
1 2