UPPAbaby Knox 1120-KNX-CA Скачать руководство пользователя страница 27

Страница: 27 / 92

The Fit Inlay should be used for a child between 6.4 and approximately 11.3 kg

(14– 25 lbs) in order to achieve a proper harness fit.

The headrest should be positioned at the child’s shoulders to ensure proper

fit of the harness. The headrest can lightly touch the shoulders and allow at
most a fingertip of space between child’s shoulders and headrest

Place Fit Inlay in seat and pull harness buckle and cover through slot in

bottom of insert.

Push Fit Inlay firmly into child restraint.

FEATURES OVERVIEW

– Fit Inlay

Remove the Fit Inlay at 11.3 kg (25 lbs) or when the child begins

growing on top of the buckle making it difficult to buckle the

harness. The Fit Inlay has a two-piece construction. If the child
is less than 11.3 kg (25 lbs), first remove the Fit Inlay Back Cushion/

Side Wings and retighten the harness. If still tight around the child’s
thighs remove the Fit Inlay completely.

Содержание Knox 1120-KNX-CA





























































































Результаты поиска

Содержание Knox 1120-KNX-CA

Отзывы:

Похожие инструкции для Knox 1120-KNX-CA

Бренды по названию

Популярные бренды

UPPAbaby Knox 1120-KNX-CA, Руководство пользователя

Результаты поиска

Содержание Knox 1120-KNX-CA

Отзывы:

Похожие инструкции для Knox 1120-KNX-CA

Бренды по названию

Популярные бренды