background image

Support and regulatory information 

EMC notices 

Federal Communications Commission (FCC) Class A Sub Part B 

United States Federal Communications Commission notices 

The following information is for FCC compliance of Class A devices: This equipment has been 

tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of 

the FCC rules. These limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. This equipment 

generates, uses, and can radiate radio-frequency energy; and, if not installed and used in 

accordance with the instruction manual, may cause harmful interference to radio 
communications. Operation of this equipment in a residential area is likely to cause harmful 

interference, in which case users will be required to correct the interference at their own 

expense. 

Modifications to this product not authorized by Uplogix could void the FCC approval and negate 
your authority to operate the product. 

Industry Canada (IC) 

This Class [A] digital apparatus complies with Canadian ICES-003. 

Cet appareil numerique de la Classe [A] est conforme à la norme NMB-003 du Canada. 

RoHS compliance 

The Envoy NRM product is in full compliance with the Directive 2002/95/EC of the European 
Parliament and of the Council of 27 January 2003 on the restriction of the use of certain 

hazardous substances in electrical and electronic equipment.  

CE Mark R & TTE directive 

This equipment has been marked with the CE mark. This mark indicates compliance with EEC 
Directives 89/336/EC (electromagnetic compatibility), 73/23/EC (low voltage), and 92/59/EC 

(general product safety).  

A full copy of the Declaration of Conformity can be obtained from: 

Uplogix, Inc. 
7600-B North Capital of Texas Highway, Suite 220 
Austin, Texas 78731 
USA 

Declaration of Conformity:

 This equipment is in compliance with the essential requirements 

and other relevant provisions of Directive 1999/5/EC. 

Déclaration de Conformité:

 Cet appareil est conforme aux conditions essentielles et à toute 

autre modalité pertinente de la Directive 1999/5/CE. 

Declaración de Conformidad:

 Este equipo cumple los requisitos esenciales y otras cláusulas 

importantes de la directiva 1999/5/CE. 

Konformitätserklärung

: Dieses Gerät erfüllt die grundlegenden Anforderungen und sonstige 

maßgebliche Bestimmungen der Richtlinie 1999/5/EG. 

Konformitätserklärung:

 Dette utstyret er i overensstemmelse med de grundlæggende krav 

og de relevante punkter i direktiv 1999/5/EF. 

40 

Installation Guide for Uplogix Secure Remote Management Appliances 

Содержание 32-port















































Отзывы: