Assembly Instructions
Choose a clean area to assemble your Risewell lifting seat chair. A
flat, sturdy surface is required. Save the box and all packing
materials.
1) Place the Left Arm Assembly on its side
with the open tubes facing upward.
2) To attach the Seat Base, ensure that the
Seat Base front is aligned with the front of
the Left Arm Assembly.
Please refer to
pages 3 and 4 for correct orientation
.
Aligning the Seat Base Tubes with those on
the Left Arm Assembly, insert the tubes on
the Seat Base into those on the Left Arm
Assembly.
3) Move the Seat Base Cover & depress the
Locking Pins on both legs and ensure that
the Locking Pins in the Seat Base lock into
the first hole as shown.
4) Hand-thread the 1/2” Seat Attachment
Screws. Tighten these with the supplied
screwdriver to rigidly attach the Left Arm
Assembly to the Seat Base.
5) To attach the Right Arm Assembly, ensure that the front of the
Right Arm Assembly is oriented with the front of the Seat Base.
Right Arm
Connector Sleeve
Motor
Control Rod
Locking Pin
Please refer to
this diagram for
steps 6 - 9.
USER GUIDE
9
Risewell User Guide 2011_Risewell Chair User Guide 3/8/2011 2:11 PM Page 5
