USER GUIDE
11
Operating Instructions
1) After you assemble your Risewell lifting seat chair, position it in
such a way that no one will trip over the power cord, and plug it in
the power outlet. Plug the other end into the Power Cord
Connector on the Seat Base.
2) Pull up the power lever located on the underside of the right
hand chair arm until the seat is raised to its full height.
3) To descend to the seated position, push down and hold the
control switch with your fingers. Hold on to the arms of the
Risewell lifting seat chair to support yourself.
4) If your feet are not comfortably flat on the floor, you may need
to remove the 1.5 inch leg extensions (see step 10 of Assembly
Instructions on page 10).
5) Pull up and hold the power lever with your fingers to rise from
the seated position. Hold on to the arms of the chair to support
yourself.
Note: To reduce the risk of electric shock, you will notice that the
Risewell lifting seat chair has a polarized plug (one blade is wider
than the other), which will only fit into the outlet one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
Caution: To retrieve an object that has fallen under the
cushion, first raise the seat cushion up, then unplug the power
cord, and reach under the cushion from either side to retrieve
the object.
Risewell User Guide 2011_Risewell Chair User Guide 3/8/2011 2:11 PM Page 7
