background image

© UPLIFT Desk

 • 1-800-349-3839 • [email protected] • www.upliftdesk.com

2

2. USAGE

This height adjustable desk has an electric motor and is designed for use in dry work areas only. The desk 
height is adjustable so that it can be positioned at the most ergonomically suitable height. These desks are 
designed only for the purposes included in this manual. They should not be used in environments with high 
humidity or dampness. Any other use is at user’s risk.
Do not move around, crawl, or lie under the desk frame. Do not sit or stand on the desk frame.
Children should never use the desk unless they are supervised by adults.

Liability: 

Under no circumstances does the manufacturer accept warranty claims or liability claims for dam-

ages caused from improper use or handling of the desk frame other than that which is described in this 
operation manual.

1. 

SAFETY AND WARNINGS

When using an electrical furnishing, basic precautions should always be followed, including the following: 
Read all instructions before using the desk.

FAILURE TO COMPLY WITH OR OBSERVE ALL INSTRUCTIONS AND WARNINGS REGARDING THE USE 
OF THIS PRODUCT MAY RESULT IN SERIOUS PROPERTY DAMAGE OR BODILY INJURY.
DANGER - 

To reduce the risk of electric shock, always unplug this furnishing from the electrical outlet be-

fore cleaning, or before putting on or taking off parts.

WARNING - 

To reduce the risk of burns, fire, electric shock, or injury to persons:

•  Close supervision is necessary when this furnishing is used by, or near children, invalids, or disabled 

persons. Keep children away from electric height-adjustable desks, control units, and keypads. 
There is a risk of injury and electric shock.

•  Use this table only for its intended use as described in these instructions. Do not use attachments 

not recommended by the manufacturer.

•  Keep the table close to the power socket/outlet to be easily accessible.
•  Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been 

dropped or damaged, or dropped into water.

•  Keep the cord away from heated surfaces.
•  Do not open any of the components: legs, control box, or keypad. There is a danger of electric 

shock. Do not insert anything into any seam or opening.

•  Keep all electrical components away from liquids.
•  Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
•  Do not use outdoors.
•  Inappropriate use of this product may cause property or bodily injury.
•  Check surroundings on all sides before using the desk. Body parts and property can be crushed if 

trapped between an immobile obstacle and the desk’s range of motion.

•  Ensure the length of power cords are accounted for when operating the desk. Monitors, comput-

ers, speakers, anything with a cord that is not long enough for the desk’s range of motion could be 
pulled down or have its wires broken. Items pulled off the desk may cause other items to fall.

•  Please provide this manual to any users, installers, or support personnel operating the product.

MAKE SURE NO OBSTACLES ARE IN THE DESK’S PATH AND ALL CORDS ARE 
OF APPROPRIATE LENGTH FOR DESK TRAVEL. FAILURE TO COMPLY WITH 
OR OBSERVE ALL ASSEMBLY, SAFETY, AND OPERATION INSTRUCTIONS AND 
WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS 
PROPERTY DAMAGE OR BODILY INJURY.

!

Содержание 3-Leg Desk










Отзывы: