Univex RDR-GAS, Руководство пользователя

Страница: 7 / 47

Page 7
U
NLOADING AND
M
OVING
The oven must be unloaded by means of a forklift, and moved internally by the same means or via
pallet changer when the oven is still resting on the skid.
Do not allow any part of your body to be under the oven during the lifting process.
Keep everyone clear from the oven if it should fall.
Upon receipt, before unpacking, check whether the packing appears to be damaged: if so, accept
the goods with reservations and provide photographic evidence of any obvious damage.
C
HECKING
Check all parts of the oven after unpacking in search of any damage.
If shipping damage is found, follow the supply contract for the necessary steps in order to receive insurance
coverage.
STORAGE AND
O
UT OF
S
ERVICE
S
TORAGE
The machine, as it is supplied, cannot be stacked on other ovens or on other goods without
providing adequate support or suitable covering to prevent damage of any kind
.
The temperature in the place of storage should be between -10°C (14°F) and 70°C (158°F); climatic
conditions as regards humidity must never be such as to cause condensation.
In general, the oven has a degree of protection equivalent to IP44.
O
UT OF SERVICE
When the machine is not in use for an extended period as in the case of summer holidays, extraordinary
maintenance, etc., proceed as follows:
- Disconnect the power, fuel and water supplies.
- Open the oven door slightly to allow some air to circulate inside and avoid the formation of mould inside
the oven. In providing the opening as described above, it may be advisable to install a screen to keep mice
out, with openings no larger than 2 inches.
RDRG