Univex RDR-GAS, Руководство пользователя

Страница: 18 / 47

Page 18
HOW TO SET A MANUAL PROGRAM:
From the Main Menu, go to “Manual” and press the key
Then press the key to enter the programming mode.
The first setting to appear is the preheating option. Scroll down the " + " and " - " keys to display "YES" or
"NO", depending on whether you want to preheat the oven before executing the set program. Press the
key to confirm the desired mode and jump to the next step.
1.
Setting the cooking time or Multi-Timer mode:
The “clock” symbol (display 1) will begin to flash. Set the desired hours and minutes using the “ + ”
and “ - “ keys. By pressing the “ - “ key in addition to the value “0”, the time will be infinite. Press the
key to confirm the parameter.

Multi-Timer mode:
You will have up to 10 programmable timers (depending on the pans), which will act solely and
exclusively on a single baking program (manual or preset). Useful for cooking different products at the
same temperature and climate, but with different times.
Press the " - " key beyond the value "0" to set the "infinite" mode. Press the key to enter the Multi-
Timer mode, signalled by the appearance of the word "Multi" beside display 1. Display 4 shows the
sequential number of the timer during programming. Use the "
+ " and " - " keys to set the desired
minutes and press the key. This will take you to the next timer to be set. Set the desired timers,
press to save the settings and jump to the next step. At the execution of the baking program, the
sequence of the set timers starts from the shorter setting.
At the end of each count, the lights inside the chamber are turned on and the buzzer is activated.
Open the door and remove the pan.
Please note that only when the door is closed, will the oven automatically resume baking by the
setting of the next timer. If the door is opened, the oven will remain in stand-by mode.
If necessary, you can add other timers during the baking program. Proceed as follows:
during the execution of the program, press the key until the first timer is available. Press the key
and, through the " + " and " - " keys, set the desired time for the additional timer. If you want to set other
timers, push the key and proceed as described above. If, on the other hand, you want to go back to the
current program with the additional changes made, press the key.
Note: to exit the Multi-Timer mode while cooking is in progress , press the key and set a specific
time you want. Press the key and the program will run in the traditional manual mode, resetting
the set timer and exiting the Multi-Timer mode.
2.
Setting the fan speed:
After setting the time parameter, you will switch to the fan speed setting:
 5 – high speed
 4 – medium speed
 3 – low speed
 2 – medium semi-static speed
 1 – low semi-static speed
RDRG