universalblue UBLAV2702-21, Руководство пользователя

Страница: 86 / 93

86
Low water
pressure
Make sure that the water inlet hose is
correctly positioned and the water faucet is
open.
Non
fucnion
drainage
pump
Overflow
The device is designed to detect overflow
problems
Noise
Normal
noise during
operation of
the device The device does not present any problem
when normal operating sounds are heard
(running water, detergent dispenser
opening...).
Incorrectly
placed
utensils Before operating the dishwasher, make sure
that the dishes and utensils have been
placed correctly.
Engine noise
The dishwasher has not been used regularly.
In that case, try to turn it on at least once a
week to ensure proper operation.
Foam in
the tray
Incorrect
detergent
Use only detergents designed for the
dishwasher. If foam is detected it is
recommended to open the dishwasher door
and wait until the foam disappears.
Add 1 litre of cold water to the flask, close
the dishwasher and start the appliance with
the pre-wash program.
Stains
inside the
dishwasher
Incorrect
detergent Make sure that the detergent used is
suitable and does not contain dyes.
Dirty
crockery
and cutlery
Incorrect
program
Select a more intense program
Placing the
correct
tableware
Place the tableware correctly as shown in
the corresponding section.
Stains on
glassware
or cutlery
Water too
hard
- Remove all metal utensils from the
appliance
- Do not add detergent-
Select the longest program-
Let the program run for 18 to 22 minutes-
Low water
temperature