manualshive.com logo in svg

Universal MSC-400, Справочное руководство

Поделиться
Скачать
Universal MSC-400 Скачать руководство пользователя страница 55

MSC-400 Reference Manual 

Rev 4 

      

 

 

 

55

 

 

 Press & Hold Relay Setting Window 

 

11. 

In the VALUE BLOCK set the TYPE of Relay using the

 

PULL-DOWN. (ex. Press & Hold On) 

12. 

IF appropriate, set a MINIMUM PRESS TIME from .1 TO 32.3 SECONDS. This will have the relay 
close (or open) for the duration designated in Minimum Press Time or for the duration of the button 
press, whichever is longer. For a purely PRESS & HOLD COMMAND set the value at .1 SECOND. 

13. 

In the TARGET BLOCK, set MSC to MASTER/SLAVE as appropriate, using the pull-down. 

14. 

In the TARGET BLOCK, set RELAY PORT to RELAY 1 or 2. 

15. 

Click OK. 

16. 

Repeat STEPS 9 -15 for all other RELAY SMART MACROS. 

17. 

To TEST a RELAY COMMAND with a TIMED DURATION (with the PC connected to the MSC400 
USB1 PORT) click the TEST BUTTON. There should be two audible clicks, from the MSC-400, equal 
to the value set in Minimum Press Time, indicating the relay is changing state. 

18. 

To test a PURE PRESS & HOLD COMMAND, or any other RELAY COMMANDS from the REMOTE, 
SAVE

 

and DOWNLOAD the MSC PROJECT. See Section: SAVING AND DOWNLOADING A MSC-

400 PROJECT for additional information. Pg #  

19. 

In MX/TX EDITOR, program the appropriate buttons for the RF TRIGGERS for the PRESS & HOLD 
RELAY COMMANDS

 

or any other RELAY COMMANDS to be TESTED from the REMOTE. See 

Section: PROGRAMMING MACRO TRIGGERS TO THE REMOTE for additional information. Pg#  

20. 

SAVE and DOWNLOAD the MX/TX PROJECT. See Section: SAVING AND DOWNLOADING A 
MX/TX PROJECT. Pg#  

21. 

TEST from the REMOTE

 

by PRESSING AND HOLDING the appropriate BUTTONS. 

 
 

 

12 

13 

14 

15 

17 

Содержание MSC-400































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды