Universal MSC-400, Справочное руководство

Страница: 26 / 94

MSC-400 Reference Manual
Rev 4 26
2. In the IMPORT DEVICE WINDOW, click the BROWSE BUTTON. The OPEN WINDOW will appear.
3. Navigate to where PROJECT FILES are saved. Click the FILE for the REMOTE that was
programmed with the IR COMMANDS and click OPEN.
4. The IMPORT DEVICE WINDOW will populate with the DEVICES that were programmed in the
REMOTE PROJECT.
. Check all BOXES for the DEVICES that are to be controlled by the MSC-400.
NOTE - It is not necessary to check Listen and Watch unless IR commands have been
associated with the Pages for those buttons. Also note that in the example, CD is not checked.
The CD Changer is going to be controlled via RS232. RS232 devices will be added and cond in
later steps. See Section: CREATING AND PROGRAMMING RS232 DEVICES for additional
information.
5. Click APPLY.
6. The devices will appear in MSC EDITOR TREE VIEW under CONNECTED DEVICES. .
With this programming, all of the IR commands associated with these devices while setting up the remote
will all now have been imported to the MSC Project.
7. Double click any CONNECTED DEVICE (DVD1) and the CONNECTED DEVICE IR COMMAND
WINDOW will open with a table of all IR commands for that device, broken down by HARD KEYS and
LCD PAGES (SOFT KEYS). You’ll use these Connected Device windows to quickly record smart
macros later.
The Connected Device Window opens when you double click the device name in Tree View.