manualshive.com logo in svg

Universal MSC-400, Справочное руководство

Поделиться
Скачать
Universal MSC-400 Скачать руководство пользователя страница 33

MSC-400 Reference Manual 

Rev 4 

      

 

 

 

33

Program Menu Step # 6 - Creating Smart Macro Groups and Smart Macros  

Macro Groups and Smart Macros are the elements of MSC-400 programming and control that make the 
user experience of MSC-400 simple: One button control of System ON/OFF Power; Single button presses 
to select Tuner, Cable or Satellite channels; One button to switch from listening to music to activating and 
configuring the Home Theater for a specific source, surround mode, video aspect ratio and light settings.  
All of this is accomplished with the simplicity of MSC-Editor and flexibility of MSC-400. 

 

Macro Groups 

Although all macros can be cond in one Macro Group, it is much easier to keep track of system 
programming by separating similar type macros into different Macro Groups. These groups could include: 
System ON/OFF Macros, Source Select Macros, Sensor Triggered Macros, Favorite Channel Macros and 
Toggle Macros. Within a Macro Group are individual Smart Macros. That is, within the System ON/OFF 
Macro Group would be of course, the System ON Smart Macro and the System OFF Smart Macro. Within 
the Source Select Macro Group would be the DVD 1 and DVD 2 Select Smart Macros, Cable Select 
Smart Macro and so on. The Smart Macros can be conditioned with IF/ELSE Statements and Action 
Variables to add intelligence to system function. 
 

 

 

 Macro Groups & Smart Macros 

 

NOTE - There are no absolutes in how a MSC-400 has to be programmed, so the following 
sections are suggestions and guidelines for Macro programming. Every system is different, every 
user has different preferences and each installer has a different perspective of how things can be 
done. However, what does get cond must be done right for the system to function properly. 

 

Adding a Macro Group and Smart Macros 

1. 

In MSC EDITOR TREE VIEW,

 

click

 

CONFIGURATION,

 

then right click any blank space in

 

TREE 

VIEW. In the pop-up, click ADD MACRO GROUP. MACRO GROUP 1 (GRP-01) will appear at the 
bottom of TREE VIEW. To name a MACRO GROUP and add SMART MACROS to the Group, do 
either of: 

2. 

In TREE VIEW: 

a) 

Right click the MACRO GROUP. In the POP-UP, select RENAME. The MACRO GROUP 
DIRECTORY will become active. Type the name of the MACRO GROUP. (System ON/OFF 
Macros). 

b) 

Click within TREE VIEW to SAVE. 

Содержание MSC-400































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды