20
Note: Before replacing Index Block “B”, ensure that the
Index Ring is properly adjusted.
2- Lift Index Block “B” straight up to remove.
The head of the Index Assembly Mounting Screw engages the T-Slot
in Index Block “B”. This mounting design facillitates height adjustment
of the Index Block during reassembly.
REMOVING AND REPLACING INDEX BLOCK “B”
1- To remove Index Block “B” from the Print Drum, roll down
the Drum Cover directly behind the Index Block to expose
the Index Assembly Mounting Screw. Using a screw driver,
turn the Mounting Screw in a clockwise direction until the
Index Block becomes loose and can be removed.
If the Indexing Assembly Block “B” is removed during disassembly it must be realigned using the
following procedure.
3- Install the Index Ring by threading it onto the axle (turning it in a
Clockwise direction) until it contacts the shoulder of the axle.
PRINT DRUM INDEX MECHANISM
MAINTENANCE
FIGURE 44
FIGURE 45
FIGURE 46