32
Fig .27.
e
- from this position rotate the wheel clockwise until the nearest spoke reaches vertical position
and depress key
. Machine computer will remember this wheel position as the fixing
point of the second weight and on the monitor screen a subsequent measurement pattern with
three windows will appear as shown in Fig.27.
Window
I
-
indicates size and position of balancing weight in the inboard plane
Window
II
- indicates size and position of the first weight in outboard correction plane fixed
behind the first spoke as determined in item c.
Window
III
- Indicates size and position of the second weight in the outboard correction plane
fixed behind the second spoke as determined i item
d
NOTE :
If performing operations described in items 4c and 4d the wheel is rotated by mistake, in the
same direction balancing machine computer will indicate the fixing point of the second weight
on the opposite side of the wheel. If however the same spoke is located twice letters
ddd
will
appear in windows II and III which always indicate an error in performance of the balancing
programme.
In both cases „ Concealed Weight” programme mast repeated from the beginning.
To return to the starting point depress key
(unbalance conversion) - and the machine will
return to the image shown in Fig 24 or depress key
.
Window I
Window II
Window III
Interpretation Window III
The balancing weight is 13 gram
weighty, arrows are inward mean,
that the weight must be fixed at
the top of rim, after rear of spoke
which is vertical position at the
moment.
Interpretation Window II
The balancing weight is 8 gram
weighty, for purpose of fiding
the spoke to fixing of wheight
is necessary to turn of wheel in
direction showed by arrows.