23
9.2. Entering measuring settings
DISTANCE - see position 8.3.1.
Balancing machine is programmed for automatic start. In such case geometrical parameters
of the wheel mounted in the chuck , will be entered in the machine memory while closing the
wheel guard and after closing the guard the machine is started automatically , measures
unbalance values stops the wheel and displays measurement results.
in items 8.3.1. - 8.3.3.
item 8.3.4. - select balancing programm
item 8.3.5. - entering cut - off threshold value
9.3. Entering measurement settings from computer memory ( manual start only)
If a wheel whose parameters were recorded in the computer memory ealier (see item.8.7.1), is to
be balanced, then push - button
.
Computer will be set in [ MEMORY READ OUT ], and image shown in Fig.21. will appear on the
screen.
Fig.21.