18
9 . W H E E L B A L A N C I N G I N S T R U C T I O N S
9.1. Mounting The wheel On The Balancing Machine
Wheels with a central hole are mounted is a central fixture, supplied as standard equipment
withthe balancing machine. This fixture is to be fitted to the balancing machine spindle as
decsribed in item 4 below.
NOTE: It is recommended to wash the wheel prior to mounting on the balancing machine to
prevent distortion of measurement by mud particles.
9.1.1 Quick release fixture
Type QUICK - TROL quick release fixture is intended for mounting car on a van wheels, with
central hole wheel rims, on balancing machines
FIXTURE COMPONENT PARTS ( Fig.13):
1 -Hub
2 -Bolt for mounting fixture to balancing machine spindle
3 -Spring
4 -Clamping nut
5 -Centering taper No.1
6 -Centering taper No.2
7 -Pressure ring
8 -Centering disc No.1 (with twin taper)** ( 120 - 140 mm)
9 -Centering disc No.2 (with twin taper)** ( 140 - 160 mm)
** extra equipment
1
2
3
4
5
6
8
9
7
1