5
Chapter 2. Operation
2.1. Product Installation
2.1.1. Harddisk installtion
Install SATA harddisk drivers to the DVR, using the provied rack brackets.
2.1.2. Connecting the camera
Connect the cameras.
2.1.3. Power supply
Connect the power supply to operate the product.
2.1.4. Product configuration
Using the default setting is sufficient, also the user can change the recording setting depending on the purpose,
the network setting for one's network environment.
2.2. System operating
2.2.1. The boot image
Figure 2.1. The boot image
During the booting time, boot image will appear. Booting takes about one minute to complete.
2.2.2. Start Menu
Two methods are available in the start menu. The start menu that appears at the bottom of the screen and the Mouse
menu that appears when you click the right button of the mouse.