Basic informationen
Edition: 2020 / V4
Page: 8
BAMOCAR-PG-D3-700/400-400
1.8
Safety regulations
In principle electronic equipment is not fault proof!
Caution - High voltage
DC > 800 V=
Shock hazard! / Danger to life!
Discharge time of the bus circuit > 4 min.
Before installation or commissioning begins, this manual must be thoroughly read and understood by
the skilled technical staff involved. It must be ensured that the documentation (manuals) and thus, the
knowledge of the unit and especially the safety advices must be available for all persons who are
concerned with the unit
If any uncertainty arises or if any function is not or not sufficiently described in the documentation, the
manufacturer or dealer should be contacted.
Any incorrect installation/connection may damage the device!
Any incorrect programming may cause dangerous movements!
Intended applications:
The devices of the BAMOCAR-PG-D3-700/400-400 are power electric parts used for regulating energy
flow.
They are designed as components to control EC synchronous motors, ac asynchronous motors in
vehicles, machines, or installations.
For applications in residential areas additional EMC measures are necessary.
Any other type of application must be approved by the manufacturer.
The user must draw up a hazard analysis for his end product.
Protection rating IP65 (Option IP69K)
Connection only to batteries
The user must draw up a hazard analysis for his machine, vehicle, or installation.
Operation only allowed when the device is closed!
Control and power connections can carry dangerous voltages even if
the drive is inoperative!
The minimum discharge time of the bus circuits is superior to
4 minutes!
Measure the voltage before any disassembly!
