United Technologies Interlogix TVK 800, Руководство пользователя

Страница: 34 / 76

32 TVK 800 User Manual
2. In the window that appears, enter the device name, device IP port, user name,
and password. Click Add to add the device.
Note
: If the information is invalid or the device is offline, the following error
message appears, “Failed to add device.”
Modify the device name
1. In the Main menu, click Device . The “ Device- Device List ” window appears.
2. Click for the device you want to modify. The “ Device- Modify Device ” window
appears.
3. Modify the device name. Click Modify to accept the changes.
Note : The user name and password refer to those required to log in to the device
from the keypad.
Delete a device
1. In the Main menu, click Device . The “ Device-Device List ” window appears.
2. Select the device to be deleted. Click .
3. Click Yes in the pop- up window to confirm the deletion.
Remotely control a DVR/NVR
You can remotely control a DVR or NVR through the keypad. There are two ways to
remotely control a device:
• Use the remote panel of the keypad.
• Use the MON key to connect directly to a DVR/NVR. This method may be easier to
use when there are several DVRs/NVRs connected to the keypad.
You can call up a specific output DVR or NVR by entering its output device number
and pressing the MON key . The output device number associated with a DVR or
NVR is shown in the “Output Settings - Output List ” window (see “Output settings ” on
page 39 for more information). A DVR or NVR can have a maximum of two monitors
connected to it. See Table 5 for an example o n how to call up the desired monitor of
a DVR accessible by the keypad .