TVK 800 User Manual
67
Setting a preset tour
Preset tours move a PTZ dome camera to a sequence of steps. The camera stays at a
step for a set dwell time before moving on to the next step. A step consists of a step
number, a dwell time, and a speed.
The step number is the order the camera will follow while cycling through the preset
tour. The dwell time is the length of time that a camera stays at a step before moving to
the next step. The speed is the rate at which the camera will move from one step to the
next.
A preset tour requires at least two pre
sets.
The PTZ dome camera must be able to support preset tours.
An error message will appear in the
Hint box of the shortcut screen when an invalid
action is entered.
There are two ways to set a preset tour:
Method 1: To set a preset tour using an output channel
1. Press the
Num
+
MON
keys
and
select the monitor
.
2. Press the
Num
+
WIN
keys
and select the video tile.
3. Press the
SET
key to enter the Settings window.
4. Press the
Num
+
PATROL
keys
to enter the
“Preset Tour Settings
”
window
.
5.
Enter the preset number
and press
ENTER
, enter the
dwell time
(called “Stop
Time on
-
screen) and press
ENTER
, and then enter the speed and press
ENTER
.
6. To set
the next preset in the tour, repeat step 5
.
Note
: To clear all programmed parameters, press the
Num
+
PATROL
keys
again.
7. Press the
SET
key again to complete the preset tour.
Method 2: To set a preset tour using an input channel
1. Press the
Num
+
CAM
keys
to
select the camera
.
Note
: The action
0
+
CAM
is invalid.
2. Press the
SET
key to enter the Settings window.
3. Press the
Num
+
PATROL
keys to enter the Preset Tour Settings window.
Содержание Interlogix TVK 800
Страница 1: ...TVK 800 User Manual P N 1072696A REV ISS 13MAY14...
Страница 25: ...TVK 800 User Manual 23 Figure 15 System Status window...
Страница 76: ......
