TVK 800 User Manual
57
Note
: If you enter 0 + MON in live view mode, multiview mode is not supported
as video is then displayed on the keypad
.
Display a specific camera on a monitor
You
can select which camera to display on a monitor.
To display a specific camera on a monitor:
1. Press the
Num
+
MON
keys
to
select the monitor
.
2. Press the
Num
+
WIN
keys to select the video tile to be displayed on the mon
itor
Or
Directly touch the keypad window to select the desired video tile.
3. Press the
Num
+
CAM
keys
to
select the camera.
For example, press 1+MON, 2+WIN, 3+CAM to decode the video signal from
Camera 3 and display it on Video tile 2
of Monitor 1.
Set up a camera group to display on a monitor
You can use a decoder to
configure the keypad to display the
images from a camera
group on a
monitor
.
When the number of cameras
in a group is l
ess than or equal to the number of video
tiles on-
screen (for example
three
cameras and four
video tiles), each camera is then
displayed on its corresponding time (for example, camera 1 on video tile 1, camera 2 on
video tile 2…)
When the number of cameras in a group is more than the number of video tiles on
-
screen (for example
16
cameras and
4
video tiles), the
cameras are displayed in th
e
following sequence mode: cameras 1 to 4
are
displayed on video tiles 1 to 4
,
next
cameras
5 to 8 on video tiles 1 to 4
, cameras
9 and 12
are displayed on video tiles 1
to
4,
and finally cameras 13 to 16
on video tiles 1 to 4.
Note
: The default dwell time is 30
seconds.
An error message will appear in the
Hint box of the shortcut screen when an invalid
action is entered.
Содержание Interlogix TVK 800
Страница 1: ...TVK 800 User Manual P N 1072696A REV ISS 13MAY14...
Страница 25: ...TVK 800 User Manual 23 Figure 15 System Status window...
Страница 76: ......
